Parts & Accessories
$17.99
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
$12.99
- Skewer Trek QR-18 100mm Bolt-On Front Black
- Skewer Trek QR-18 135mm Bolt-On Rear Black
$11.50 - $42.00
We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims.
- Teravail Tubeless Tape comes in a variety of widths to fit almost any rim.
- Teravail Tubeless Tape is available in a variety of widths and roll lengths.
- Ten-meter length is enough for a single layer on approximately four wheels
$1.99
- For square taper and flanged.
- Fits most cartridge BBs
- Shell: 8mm Flanged axle bolt
$6.99
- Fits all freewheel hubs
- Will not fit Cassette hubs
- Type: STD Plastic
- Color: Clear
$3.99
The Stolen rim strip features 30mm width and 20" diameter.
- Material: PVC
- Wheel Size: 20"
- Rim Strip Width (mm): 30 mm
- Adhesive: No
$4.99
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
$14.99 - $23.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3
$18.99
- Replacement rear wheel skewer.
- Specifically designed for use with Saris trainers.
- Can be used for both indoor and outdoor rides.
$71.99
Purchase our Kid Trailer axle for your bike. and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure.
Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more.
- This axle is specifically designed to fit the 142/148 hub standard Surly MDS or Gnot Boost bikes.
- The derailleur end of our axle is internally threaded and will use the bolt from your stock Surly axle. The disc brake side of our axle has an engineered mount for your trailer hitch. That mount has been permanently attached to the axle.
- The axle shaft and axle end are precision CNC-machined.
- The axle shaft is 7075 aluminum and hard black-anodized for rugged durability.
- The stainless steel axle end allows for mounting of the hitch provided with your trailer. The threads are M10x1 (metric).
- Hardware for attachment of the hitch is included; the hitch, itself, is not.
- No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
$5.99 - $6.49
Origin-8's Pro Pulsion Rim Strips are made from a super-durable, environmentally friendly PVC material.
$3.99 - $6.49
Protect your tubes without adding bulk with these Rim Strips from FSA. They're lightweight, and come in different lengths according to wheel size. Peace-of-mind comes standard.
$74.99
The buyer's choice for wheel builders looking to save weight.
The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use.
- Weight: starting at 20g for 64 nipples
$26.99
Refresh your Bontrager wheels.
Genuine replacement parts
When it's time to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered.
- Original equipment replacement freehub body, to be used with 7-speed cassettes
- Compatible with Bontrager 7-speed wheels with a freehub body
- Not compatible with wheels using a threaded freewheel
$119.99
Upgrade or refresh your Bontrager wheels.
Genuine replacement parts
Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered.
- Replacement parts for Bontrager hubs using the DT 240 platform
- Compatible with all Bontrager wheels with DT 240 hub internals
- Includes 11-Speed specific 5mm quick-release end cap
$99.99
Upgrade or refresh your Bontrager wheels.
Genuine replacement parts
Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered.
- Replacement freehub body
- Compatible with Bontrager Rapid Drive 108 hubs
- Pawls and springs sold separately
- Install 3 pawls/springs for 54 tooth engagement or 6 pawls springs for 108 tooth
$12.99 - $15.99
Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips
The valves you need to upgrade to Tubeless
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Product details
- To be used exclusively with Bontrager Tubeless Ready (TLR) wheels
- Use only with Bontrager TLR rim strip with rectangular base
- Required for Bontrager's Tubeless Ready (TLR) system setup
- Removable valve core for easy sealant fill
- Sold as singles
$10.99 - $11.99
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Key features:
- To be used exclusively with Bontrager Tubeless Ready (TLR) wheels
- Required for Bontrager's Tubeless Ready (TLR) system setup
- Removable valve core for easy sealant fill
- Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40
- Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels
$39.99
These original replacements will get your wheels working like new.
- Alloy thru-axle that can be used with a 6mm hex wrench or with a lever
- Keep it light by removing the lever and instead use a 6mm hex wrench
- Keep it convenient by keeping the lever inside the axle
- Lever is held securely by internal O-ring
- Lever sold separately
$20.99
To be used exclusively with Bontrager Tubeless Ready (TLR) rims.
The rim strips you need to upgrade to Tubeless
These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Product details
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Use only with appropriate Bontrager TLR rim valve
- Rim strip replacement is recommended if removed from the wheel
- Sold as singles
- White strip is recommended for carbon rims
- TLR rim valve sold separately
$20.99
These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Key features:
- To be used exclusively with Bontrager 29"/700c Tubeless Ready (TLR) wheels
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Rim Strip replacement is recommended if removed from the wheel
- For specific compatibility, access 'WHEELS' tab on the Tech Site or contact Customer Service
$24.99
Bontrager Tubeless (TLR) Rim Tape creates an air-tight seal that covers spoke holes in the rim for easy tubeless tire setup and installation. The tape securely bonds to the rim and doesn't leave residue when removed. For use with wheels approved for TLR Tape-based tubeless conversion.
- Provides durable, air-tight seal over spoke holes for tubeless conversion
- Wrap four wheels with a single layer of tape or two wheels with a double layer
- Provides secure adhesion to rim without leaving residue when removed
- Thoroughly clean and dry rim bed before applying
- For use with rims approved for TLR Tape-based tubeless conversion
Page 1 of 1