Filter By:
- Accessories/Parts (244)
- Hitch-Mount (56)
- Pickup/RV/Spare-Tire Mount (23)
- Roof-Mount (79)
- Trunk-Mount (21)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Car Racks
$6.95
Replacement snap-in nylon shims for the RockyMounts DriveShaft product line. Shims enable DriveShafts to carry a thru-axle equipped bike. Shims can be used on RockyMounts DriveShaft, DriveShaft HM, and DriveShaft SD.
$7.95
The TC2 Thule Wheel Tray End Caps are compatible with the following Thule Wheel Trays: Thule 594 Sidearm, 594XT Sidearm, Thule 599XTR Big Mouth, Thule 589 Velo Vise, Thule 590 V2, Thule 590R V2 Recumbent, Thule 591 Long Tray Classic, Thule 517 Peloton, and the Thule 518 Echelon.
• Sold as a set of two
• Replacement parts for broken or lost end caps
$9.95
Thru axle adaptor sleeve for StreetRod, HotRod & SwitchHitter. Simply loosen the screws, remove your existing axle and slide this in.
$9.99
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
$10.00
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks.
- Includes two straps
- L 15.50" x W 1.00"
$11.99
Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.
$12.99
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
$12.99
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
$13.00
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in the skewer, and you're all set.
$14.95
The Thule Xadapt 1 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid or Xsporter load bars. Please contact us with any questions regarding compatibility.
$14.95
The Thule Xadapt 3 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.
$14.95
The Thule Xadapt 8 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.
$14.95
The Thule Xadapt 9 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid Aero and Thule Professional load bars. Please contact us with any questions regarding compatibility.
$14.95
Thule's Load Bar End Caps are replacement end caps for rectangular load bars.
$15.00
Kuat's 1.25" to 2" adapter mounts to your 1.25-inch Kuat Alpha, Beta, or Sherpa rack, allowing them to fit a 2-inch receiver. Mounting hardware included.
$15.00
These durable, easy to install felt pads are custom shaped for SweetRoll and HullHound and provide additional protection for your boat. Sold as pairs.
$15.00
Thru-axle adapter works with WheelHouse to hold wheels with 12mm/15mm thru-axle.
- Easy cam lever for quick installation
- Durable stainless steel skewer
- Up to 110mm front Hubs
TECHNICAL SPECS
- Weight: 0.44 lbs
- Dimensions: L 9.00” x W 0.75” x H 2.00”
$17.00
Yakima's SKS Accessory Lock Housing is a great way to make sure your bike and luggage mounts stay put. It works with Yakima's SKS lock cores (Same Key System; sold separately) so that you only need to keep track of one key for all your rack-security needs.
- Lock rack accessories to your vehicle's crossbar
- Use with bike, boat, and BasketCase accessories
- SKS Lock Cores sold separately
$18.95 - $44.95
Use the RockyMounts Lock Cores to secure your belongings, whether you're using the TieRod, PitchFork, TailPipe, LiftOp or any other RockyMounts rack. Each pack of Lock Cores comes with two keys and one, two, four, six, or eight lock cores.
$19.00 - $29.00
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm thru-axle, and you're all set.
$19.00
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 20mm thru-axle, and you're all set.
$19.00
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface. This mount works for most quick-release fat bike forks.
$19.00
An adapter for Kuat's Trio roof rack to make it compatible with most 15mm thru-axle fat bike forks. Includes rear tire strap extension. Available in 142mm and 150mm-wide models.
$19.00
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad.
PRODUCT DETAILS
- Foam padding protects boats and other cargo from damage
-Durable, ballistic nylon construction
- Look and loop closures and 28” length perfectly fit around the LongArm crossbar
- Center cutout allows side or centered placement on crossbar
- Sold as a single pad
TECHNICAL SPECS
- Weight: 0.50 lbs
- Dimensions: L 28.00in x W 3.00in x H 3.00in
$19.00
Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1. This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market.
PRODUCT DETAILS
- Includes T-slot hardware, covers, and install tool.
- Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts.
- Compatible with Yakima JetStream bars and most other T-slot style crossbars.
TECHNICAL SPECS
- Weight: 0.25 lbs
$19.00
Go super sleek with this low-profile conversion kit that lets you mount your FatCat or FatCat EVO to T-slotted crossbars, such as Yakima's JetStream bars.
PRODUCT DETAILS
- Custom-designed for Yakima FatCat and FatCat EVO snowsports mounts
- Quick and easy installation
- Includes slide in T-bolts and low-profile spacers
- Works with our JetStream bars, FlushBar, RailBar, and most other t-slot style crossbars
TECHNICAL SPECS
- Weight: 0.30 lbs
- Dimensions: L 0.75in x W 0.75in x H 2.00in
Page 1 of 14
Next page